...let 'er show up...
Sometime ago I entered a swap for Rolodex cards, by a friend who goes by the username Nightowl_too. There was a misunderstanding in the rules...which then turned into a happy accident! The happy accident turned into some really fun tab topped Rolo cards, to be created in a new swap hosted by Notinkansas. Here is a tut on how I did mine.
First it starts with a sketch. I did mine on Rolo blanks that were made over sized. It's still the standard 4 inches across. However, I made it taller than 2 1/4 inches tall. I made it approximately 3 1/2 inches tall.
I drew in my bird and traced in where my cut line would be. My cut lines varied, but for the most part I kept it near what would be the original height of 2 1/4 inches. Below is a pic of where I am coloring in the bottom half. The white section above will be cut away.
Here's the finished card...
Here is another step by step pic...
I cut Bristol paper down to 3 1/2 x 4 inches. Rounded the bottom corners. Punched the Rolodex holes, then art'ed.
Here are a few more examples...
Anyhoot, that's it for today. Again...I've been having some troubles with pictures disappearing from my posts...fingers crossed that these will stick!